This is what that supplied screws looked like when inserted into the JIG.
Measuring the screw, this is what I came up with.
Compare supplied screw with an AN3-6A bolt. (10-32 X 3/4″)
Length of fastener (AN3-6A) that I had in my shop.
This is what the supplied nut looked like when I used my AN3-6A bolt inserted from the side the nut would normally be placed. Nutdriver used to tighten the nut.
Using a metal nut it looks like this.
Here is a view of what the supplied screw looks like when inserted from the side that the nut would normally go on.
Just trying to help others that may experience this minor issue.